There is no USB: there is no way to use it as an external storage device and for connecting 3G modems.Ĭonfiguring Wi-Fi ADSL modem Huawei HG532eįront ADSL setting modem Huawei HG532e we check the correctness of the network cable connection, the performance of the computer's network card and this modem.Ethernet router: 4 × LAN with LAN port speed: 10/100 Mbps.Information channel protection: AES encryption, TKIP, WEP (64/128), WPA-PSK, WPA2-PSK.Antenna: built-in 2x2 with MIMO support.Wi-Fi hotspot: 802.11 b / g / n with a frequency of 2.4 GHz.HUAWEI HG532e Wireless ADSL2 + Wireless Router Specifications We have turned on and configured WiFi network to the router HuaWei HG532 e
In order to add a mac-address to the list, click “New” and in the “Select SSID” field select the SSID of the network for which this list is valid, and in the “Source MAC address” field enter the mac-address of the required device. Or the list of allowed mac-addresses (whitelist), that is, only mac-address devices that are on this list will be able to connect to our network. devices with mac-addresses from the list will not be able to connect to our WiFi network. Now we can create a list of either blocked mac-addresses (blacklist), i.e. To enable the filter, put a tick in front of "Enable". To do this, go to the "WLAN Filtering" tab If you want to improve the security of your WiFi network, you can configure filters. In the "WPA encryption" field, select the encryption method.Īfter entering all the settings, click "Submit". In the "WPA pre-share key" field, sets the access key to our WiFi network. In the "Security" field, select the authentication mode.
In the "SSID" field, enable or disable given WiFi network. In the "Maximum number of accessing device" field, select the maximum number of simultaneously connected clients. In the "SSID" field, select a name for our WiFi network. In the "SSID Index" field, select the number of the WiFi network.
In the "Transmit Power" field, we set the transmitter power from 1 to 20 In the "Channel" field, select the number of the channel on which our WiFi will work, you can set Auto (let the router decide which channel it will work on, in this mode the "Country" field will be taken into account, and the router will also choose the quietest channel) Please note that it is better to choose the country in which the access point is located, otherwise there may be problems with regulatory authorities (in some countries, certain channels are allowed). In the "Country" field, select the country.
(Ie We have chosen all the standards, in this mode you will lose a little in the speed of the WiFi connection) In the "Mode" field one of the WiFi standards, if you do not know what to install, then put 802.11b / g / n. In order to enable WiFi on the HuaWei HG532E, you must check the "SSID" box next to Enable. Then the WiFi configuration window appears. Now, in order to enable and configure WiFi on the HuaWei HG532E router, you need to go to the Basic -> WLAN menuĪnd in the window that opens, put a checkmark in front of "Enable WLAN": And thirdly, you can always change this data. Turn the modem over and you will see them on the label:Īs you can see, it is very convenient). Firstly, these data are unique, secondly, you will not forget them, and if you forget, then you have a hint. You can change this data, but I would not recommend it. Where you can change the SSID of your WiFi network (name) and Key (password to access this network). Click "Login".Īnd we get to the page "Quik Configure Home Gateway: Wireless Network"
By default, Username is admin and Password is admin. For this in address bar browser, enter the address of our router, by default 192.168.1.1. In order to turn it on, you need to go to the modem. And today we will enable and configure WiFi on the HuaWei HG532E router. So in the last article we looked at creating a DHCP connection. We continue to configure the HuaWei HG532E router.